2009-2018 Dodge Ram Cargo CHMSL Camera Upgrade

• Related Articles

• Cargo Camera Icon

  "My cargo camera icon is not showing up, but I got a green light when I used the OBDGenie?" Perform a can-bus reset. CAN-bus Reset: Remove positive and negative cables from the vehicle battery. Touch and hold the cables together for  5 - 10 seconds. ...

• Can't navigate multiple camera inputs with UAQ/UAS upgrade

  If your vehicle has multiple cameras, such as a reverse, cargo and front camera, and you have the appropriate hardware to route which camera image appears in your radio head-unit's screen, note that not all of these functions will be retained when ...

• IOU Upgrade Backup Camera TSB

  On some model Silverado trucks the backup camera mounting location needs to be modified to accept the new camera included in the upgrade. If attempting to install the new camera into the tailgate handle, and you run into an issue where the camera ...

• Cargo Camera - Grid Lines

  To turn off Grid Lines for a RAM Cargo Camera: You will need to snip the green wire, this might be labeled "Parking Lines". If you are still seeing the grid lines (parking lines) after snipping the green wire or if the green wire is already snipped, ...

• "Service Rearview camera" error after installing GM back up camera

  Once confirming you're pre-wired in a 15 model vehicle or installing the camera in a 16 year vehicle or newer, you'll typically want to install the camera wiring into the dummy plug. However, those who have a locking tailgate handle be sure to swap ...