2013-2014 Vehicles--How to install the Infotainment 4C Retrofit Interface
This allows the heated/cooled seats to be controlled from the radio. The black box on the right of the picture is the programmer and can be tucked behind the radio. If you are also adding a rear camera and/or cargo camera, you will need this product: https://www.infotainment.com/products/c4-rca-camera-input-harness. If adding the additional camera interface harness, you will need to connect the black plug with swing lock to the open end of this harness (top of picture) and the original plug will go to the open end of the camera interface harness, essentially creating a daisy chain.
Related Articles
Q: I installed the C-ACC-LD OBD Genie programmer in my 2011-2014 Chrysler 300 / Dodge Charger to enable AUTO temperature control and it's not working.
Q: I installed the C-ACC-LD OBD Genie programmer in my 2011-2014 Chrysler 300 / Dodge Charger to enable AUTO temperature control and it's not working. A: If the programmer's embedded LED turned green then the vehicle's computer has been programmed. ...Enzo C-INT4CK Instructions
FCA Heated and Ventilated Seat including Heated Steering Wheel Emulator (C-INT4CK) For those who upgrade to the 8.4" radio and their heated/cooled seats & heated/cooled steering wheel in the new radio are grayed out, we have a solution. Example of ...Hardmount C-SATF-DT Skarkfin Antennas on Heavy Duty Rams
The C-SATF-DT antenna will not fit on Heavy Duty Rams. In this case, the existing sharkfin antenna can stay and only need U-INTC2KOBD Genie App
OBD Genie App for C-RVC only To use the app to refresh the genie for Rear View Camera programming follow the steps below. 1. Download the OBD Genie Troubleshooting App on a iPhone or iPad. (App only works on Apple phones/pads) OBD Genie ...Performance Pages won't stay on after turning off radio.
The Performance Pages are a feature of UConnect Access, or Sirius Guardian in 2018+ vehicles. Upon upgrading to one of our radios, you'll lose access to these features, unless you call the associated company and add the new unit to the service. Given ...