An 8 inch display is the default configuration of this upgrade and proper programing is needed for the vehicle to accept the full 10.1 inch display. If you run into an issue of the display on showing you an 8 inch resolution, after installing the ...
If you installed your upgrade kit and notice that your radio no longer turns on please check the followings: 1. If you received a C-INT-C4T (the big harness that connects to the radio and existing power harness) in your kit, make sure that the white ...
Please click this link to view the product details Attached below is the product manual for this unit Troubleshooting: "Radio Locked, Please Start Vehicle" error message explained. If you're having additional issues, try some additional ...
Parts Required Two Genies labeled LD, and DS Wire connector that you will use to connect the sensor Temperature Sensor Security bypass if you are an 18+ year Installation Attach the sensor wire to the open molenex connector on the harness that is ...
After installation of your Entune radio, you may run into a situation where your radio won't power on. The reason being where one of the harnesses is hooked up; You have to move it from the right to left left, behind the unit.