If you have a Cab mounted light, and are changing your rear view mirror to the Uconnect Microphone Mirror you will need to switch some pins to retain functionality of the cab lights. You just need to pin the power, and ground into the new harness, ...
The CPFM Genie is used to program for the following; Puddle Lights Heated Mirrors Electro-Chromatic Power Folding It will not "program for tilting" as the mirrors will sell don't have motors and have to be tilted manually.
If you just installed the Power Folding Mirror with the blind spot feature but it wouldn't turn off then the BSS needs to be re calibrated. Please follow the steps below to calibrate the BSS. Calibrating the BSS To calibrate the BSS: 1. Drive the ...
After installation of your Entune radio, you may run into a situation where your radio won't power on. The reason being where one of the harnesses is hooked up; You have to move it from the right to left left, behind the unit.
If you installed your upgrade kit and notice that your radio no longer turns on please check the followings: 1. If you received a C-INT-C4T (the big harness that connects to the radio and existing power harness) in your kit, make sure that the white ...