GM - Cameras - "No camera available"
The vehicle may not be pre-wired for a backup camera. We will need to exchange the unit for one with the wiring loom. They will need to run the camera wiring behind the glove box to the HMI module. Simply remove the glove compartment and locate the module in this picture:
Locate power behind the cigarette lighter outlet. Tap into the red wire and ground black wire to chassis.
Related Articles
GM Backup Camera Auto Lock Connector
If a customer asks "What is the small, two-pin plug?" (Black and White Wires) This is for the auto tailgate locking mechanism. Customer needs to move the auto lock mechanism over from their factory tailgate handle over to the new tailgate handle from ...GM - Cameras - Turn On Grid Lines
Turning Grid Lines On: If you are or aren't seeing grid lines on the screen as you are using the rear view camera, simply follow the instructions down below. Also, click on the link below to see an example of how to turn the grid lines on or off. ...Auto-Locking Tailgate: "Where do I plug in camera?" or "I get a blue screen/no camera available screen on radio" (IOB & IO4/5/6)
Auto-Locking Tailgate: "Where do I plug in camera?" or "I get a blue screen/no camera available screen on radio" (IOB & IO4/5/6) If you have a locking tailgate, please follow the cable from the existing handle to where it's plugged in. Replace plug ...Voice Recognition Not Available / UConnect not available error with Handsfree microphone on RER or RHR
After installing your UConnect Handsfree Microphone into your RER or RHR headunit, and trying to set up voice recognition, if you receive and error stating "Voice recognition not available. UConnect not available," do the below following steps to fix ...IOU Upgrade Backup Camera TSB
On some model Silverado trucks the backup camera mounting location needs to be modified to accept the new camera included in the upgrade. If attempting to install the new camera into the tailgate handle, and you run into an issue where the camera ...