2015 Chevrolet Colorado MyLink® IO6 Upgrade HMI Location

The HMI is located behind the screen, and under the ACM, in this vehicle. After removing the other parts to gain access, simply replace the HMI module with your new one and reseat connectors.

• Related Articles

• Mylink won't connect to Apple carplay/ Android Auto GPS upgrade

  After upgrading your GMC vehicle with the io5/io6 module, you may notice the MyLink application suite is not updating. If you had MyLink before this upgrade, you will need to reinstall your previous HMI and de-register the module using your MyLink ...

• Apple CarPlay / Android Auto Does Not Work

  1. You must replace your USB Hub! The number one cause of this issue is the media hub. The original media hub will give you Android Auto with the new system installed but the Apple CarPlay will not work.  You should have received a new media hub with ...

• io6 Install Instructions for 2015 Colorado/Canyon

  Below you can find some additional information on an io6 upgrade for a 2015 Colorado/Canyon.  You can see the store page by clicking here. The picture above shows the location of where the HMI module is located. The picture below shows a 3D model of ...

• Genie not programming for IOU upgrade

  The vehicle must ALWAYS be in Accessory Mode for one minute, before placing your OBD Genie into the OBDII port, as the Genie can't be read by your vehicle when it's running. However, if the Genie programming is unsuccessful, with navigation not ...

• Can't play videos after installing HMI

  You lose the ability to play videos formats through USB when installing this upgrades. Music files, like MP3 still work.