When installing the wiring harnesses for the Passive Entry Upgrade, you may notice the video's harnesses are slightly different than the harnesses that are included with the kit. This is due to bulk manufacturing, and the manufacturer labeled these rather than them being color coded.
Instead of the wires in the video being show as being Yellow, White, Orange, Violet respectively, the actual harnesses will say Sense and Return on black and white wires.
Driver door passive entry harness.
Sense - Green/yellow pin 25
Return - Green/white pin 26
Passenger door passive entry harness.
Sense - Green/orange pin 21
Return - Green/violet pin 20
We've had one occurrence of the Light Switch that is included with this upgrade to add Foglight as an option, where after installation, the vehicle's headlights were stuck in the on position. The headlights would not turn off. Putting the old switch ...
Can't control climate on 8.4 Jeep Wrangler screen upgrade After installing an 8.4 inch screen upgrade, if you've noticed that you can control your climate on the hard knobs but not the touchscreen, it's because your stock climate control is analog. ...
C-INTC3T RE2 RB5 Camera Repining Guide If your RB5 or RE2 radio already has the C3 connector with populated wires like the photo below, you will not be able to use our connector because you will lose audio and microphone for bluetooth functions. You ...
FCA Heated and Ventilated Seat including Heated Steering Wheel Emulator (C-INT4CK) For those who upgrade to the 8.4" radio and their heated/cooled seats & heated/cooled steering wheel in the new radio are grayed out, we have a solution. Example of ...
OBD Genie Troubleshooting Guide Following this simple instructions is the first steps to getting you back on the road with all the new modifications. My OBDGenie is not doing anything. No lights appear when plugged in, I can't tell if it's getting ...