2018 + Vehicles With ESS, or Engine Start Stop

2018 + Vehicles With ESS, or Engine Start Stop

2018 + Vehicles With ESS, or Engine Start Stop

If you have an 18+, or any vehicle with engine start stop feature you will most likely have a second battery in the vehicle.
If you do have a second battery please do not perform a CAN-BUS reset.
You are best off just leaving the negative on the battery disconnected as you can pop you're fuse relay from the second battery still being connected.
This has happened mainly on Jeeps with the ESS feature. If you are getting odd things after trying a CAN-BUS you may have blown the fuse relay IF you have ESS. I will leave a part number, and link to a video explaining this for a jeep wrangler.

Genuine OE Mopar Fuse-Z Case: 68368853AA



    • Related Articles

    • 2019 Pacifica ESS Installation

      You can simply remove the instrument panel with a pry tool as that is held on by retaining clips. You will be connecting to the plug where all your button controls are as this connection is keyed You can follow the installation for more information ...

    • "Radio Locked Please Start Vehicle"

      "Radio Locked Please Start Vehicle" If you are receiving this message, then you have either a Chrysler 200, Jeep Cherokee, Jeep Renegade or a Jeep Compass. These two vehicles use a Fiat based computer system and will need to have the vehicle's ...

    • The elements that will prevent remote start from working

      Ensure that your vehicle is not doing any of the following in order to allow the remote start upgrade to work: -If the engine stalls or RPM exceeds 2500 -Any engine warning lamps come on -The hood is opened -The hazard switch is pressed -The ...

    • Getting "mechanism error" when trying to play a CD or DVD

      If you are receiving this error, please try a few different CDs and DVDs to make sure it isn't due to a dirty or scratched disc. Make sure to test with a CD or DVD that is not a CDR/DVDR (burned). Clean the disc by wiping with a dry soft cotton ...

    • UAV/UAX windshield wipers won't stop after installing unit/Genie

      UAV/UAX windshield wipers won't stop after installing unit/Genie Please have your vehicle completely turned off, or battery terminals removed, during the installation process of your retrofit upgrade. If you install this with your vehicle on or in ...