2019 Pacifica ESS Installation

2019 Pacifica ESS Installation

You can simply remove the instrument panel with a pry tool as that is held on by retaining clips. You will be connecting to the plug where all your button controls are as this connection is keyed You can follow the installation for more information on how this product works although it will be a different vehicle shown.

At about 3:00 into the video


  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.

    2.  
  2. Using trim tool or equivalent, carefully pry up on the edges of ICS (1) to disengage retaining clips. Disconnect the Electronic Shift Module (ESM) and ICS wire harness connectors.


    3.  

    • Related Articles

    • 2018 + Vehicles With ESS, or Engine Start Stop

      2018 + Vehicles With ESS, or Engine Start Stop If you have an 18+, or any vehicle with engine start stop feature you will most likely have a second battery in the vehicle. If you do have a second battery please do not perform a CAN-BUS reset. You are ...

    • "Radio Locked Please Start Vehicle"

      "Radio Locked Please Start Vehicle" If you are receiving this message, then you have either a Chrysler 200, Jeep Cherokee, Jeep Renegade or a Jeep Compass. These two vehicles use a Fiat based computer system and will need to have the vehicle's ...

    • Enzo C-INT4CK Instructions

      FCA Heated and Ventilated Seat including Heated Steering Wheel Emulator (C-INT4CK) For those who upgrade to the 8.4" radio and their heated/cooled seats & heated/cooled steering wheel in the new radio are grayed out, we have a solution. Example of ...

    • The elements that will prevent remote start from working

      Ensure that your vehicle is not doing any of the following in order to allow the remote start upgrade to work: -If the engine stalls or RPM exceeds 2500 -Any engine warning lamps come on -The hood is opened -The hazard switch is pressed -The ...

    • Hill Start Assist & Horn Options Missing

      Hill Start Assist & Horn Options Missing If you upgrade to a new digital cluster, you may be missing certain options in the settings that you previously had. This is because these clusters typically come in vehicles that feature an 8" radio from ...