360 Camera Module Locations

When a customer has to replace their 360 Camera module in their vehicle after upgrading to a Uconnect 5 radio, there are two locations for the 360 module.

In the 1500s it is located behind the passenger side kick panel. Once removed you'll see the 360 module with its Fakras pointed down bolted in place. 

For Heavy Duty vehicles the 360 module is located under the driver's seat. 

• Related Articles

• C-INTC4T to U-INTRCA (If customer receives C4T instead of U-INTRCA in Uconnect 5 Cargo Camera Kit)

  If you ordered a cargo camera and got a C-INTC4T but you have a Uconnect 5 radio installed in your vehicle then you need U-INTRCA to connect the cargo camera to the radio. The C-INTC4T is make for the Uconnect 4 radios. You can cut the female RCA off ...

• MFT Impala OnStar Module Location

  MFT Impala OnStar Module Location

• Security Bypass Module location & instructions

  If you have a 2018+ Chrysler, Dodge, Ram or Jeep Vehicle, you will need to temporarily install a Security Bypass Module: https://www.infotainment.com/products/fca-security-gateway-module-bypass The security bypass module is plugged into the vehicle, ...

• IOU Upgrade Backup Camera TSB

  On some model Silverado trucks the backup camera mounting location needs to be modified to accept the new camera included in the upgrade. If attempting to install the new camera into the tailgate handle, and you run into an issue where the camera ...

• 2022+ Uconnect 5 Cargo Camera Posi-Tap Guide

  If you have a Uconnect 5 system, then you will be receiving a pigtail adapter with a yellow RCA and two posi-taps. Red is the Camera Signal, and Black is the Camera Return. You will be tapping to the Blue connector on the back of the radio unit. The ...