C-INTC2T Mygig Camera Repining RER RHR REN RBZ RHB
C-INTC2T Mygig Camera Repining RER RHR REN RBZ RHB
This is for vehicles that have a Mygig style radio. Such as RER/RHR/REN/RBZ/RHB and the white plug already exists behind the radio.
You will not be using our connector provided, you will need to de-pin the 2 wires from our connector, and then pin them to the same cavities on your factory connector.
Just in case you lost your orientation, the picture below can assist.
This is how the connector looks when you're looking at the side that plugs to the radio, on the back side the wires are coming out.
You just need to put them to cavity 3 for Signal (Red wire), and 4 for Return (Black Wire).
Related Articles
How To Master Reset RER and RHR (Video)
How To Master Reset RER and RHR (Video) If you are having any issues with your MyGIG such as frozen screen or black screen but buttons are lit up and/or the radio is still playing, you can try this first: •Turn off the car and removing keys, •Open ...How to Pair A Phone on RHB/RBZ
How to Pair A Phone on RHB/RBZ Step 1: Complete the following steps on the system: Push phone button. Say "setup" when prompted. Say "device pairing" when prompted. Say "pair a device" when prompted. Say "continue" when prompted. Say a 4-digit PIN ...RER & RHR Engineering Mode (Resetting the radio)
RER & RHR Engineering Mode (Resetting the radio) RER and RHR Engineering Menu: SEEK UP/DOWN and MENU, then click Accept at the warning screen. DO NOT DO A SCREEN CALIBRATION UNDER ANY CIRCUMSTANCES Go down a page or two, and you should see "Factory ...Voice Text Reply Feature for RHB/RBZ
Both the RBZ and RHB have voice texting capability. But the vehicle must be pre-installed with the UConnect Hands Free module. If the vehicle doesn't have one, then it can be purchased through the dealership, MOPAR, and we also sell the kits. If ...Bluetooth not pairing in RER or RHR
Bluetooth not pairing in RER or RHR If you're unable to pair your phone with your RER or RHR, and removing the save connections from your handheld device and radio doesn't correct this, first try a Reset by going by accessing Engineering Mode. 1. RER ...