Caller Can not Hear Me in Bluetooth Phone Mode
Please ensure that you received the F428 Genie programmer with your upgrade. If not, please contact customer support. If so, please run the programmer. Instructions on using the Genie programmer are in the installation video at 16:05:
https://www.youtube.com/watch?time_continue=967&v=6Ru9kGKcwek. The video is for the F-150, but the process is the same for all vehicles.
Related Articles
Bluetooth not pairing in RER or RHR
If you're unable to pair your phone with your RER or RHR, and removing the save connections from your handheld device and radio doesn't correct this, first try a Reset by going by accessing Engineering Mode. 1. RER and RHR Engineering Menu: SEEK ...
Dealer Mode
Method 1: Hold down the bottom corners of the touch screen for another way to enter dealer mode. Method 2: STEP 1: • Put the system into ‘Dealer Mode’ • Hold the Driver Side Temp Up and Temp Down and Front Defrost buttons down at the same time for ...
UAV & UAX bluetooth range is too short
After installing a UAV or UAX upgrade, and pairing the head unit with a bluetooth device, if you notice your linked bluetooth device needs to be extremely close to the unit to hold signal, you'll need a small blue fakra, with an adapter amplifier, ...
Static in Bluetooth Music Streaming Mode
This is a phone related issue. •Unpair and forget from both the Infotainment system and your phone. •Restart your phone. •Try to repair both devices. If this does not work, please try to test a different phone.
How to Pair A Phone on RHB/RBZ
Step 1: Complete the following steps on the system: Push phone button. Say "setup" when prompted. Say "device pairing" when prompted. Say "pair a device" when prompted. Say "continue" when prompted. Say a 4-digit PIN when prompted. Say "yes" when ...