Can't play videos after installing HMI

• Related Articles

• 2015 Chevrolet Colorado MyLink® IO6 Upgrade HMI Location

  The HMI is located behind the screen, and under the ACM, in this vehicle. After removing the other parts to gain access, simply replace the HMI module with your new one and reseat connectors.

• When screen experiences imaging issues other than back up camera in Chevy vehicles

  In Chevy vehicles, your HMI (Human Machine Interface) controls your visual feedback. Meaning if you experience an issue where the screen is having imaging issues only during certain functions, it may be the HMI, however, if the back up camera has a ...

• OnStar not working after installing IOR module

  1. Make sure that the OnStar module is plugged in, in the port in between the black USB and XM port. 2. Try Steering wheel controls and see if voice commands still work. 3. Make sure bluetooth still works. (If so, it's proof that OnStar is working.)

• Ford SYNC Navigation Upgrade USB Stick 1/2 Issues

  Below are the common issues associated with the USB Stick Sync Upgrade Kit "You have already updated your software successfully. Please remove USB stick"        •Proceed to USB stick two. You do not need to run USB stick one. System did not reset ...

• Ford Mustang 4" to 8" Sync 3 Upgrade: "I'M MISSING CABLES FROM MY KIT"

  If you've purchased the Ford Mustang 4" to 8" Sync 3 upgrade and watched our installation video you may see that there are two small cables that are mentioned and is missing from your kit. We are sorry for the confusion, but we've improved our kit to ...