CPFM Power Folding Mirrors Genie functions

The CPFM Genie is used to program for the following;

It will not "program for tilting" as the mirrors will sell don't have motors and have to be tilted manually.

Related Articles
POWER FOLDING MIRROR: BLIND SPOT SENSOR STAYS ON
If you just installed the Power Folding Mirror with the blind spot feature but it wouldn't turn off then the BSS needs to be re calibrated. Please follow the steps below to calibrate the BSS. Calibrating the BSS To calibrate the BSS: 1. Drive the ...
Ram Cab Mounted Lighting Pin out for Uconnect Mirror replacement
If you have a Cab mounted light, and are changing your rear view mirror to the Uconnect Microphone Mirror you will need to switch some pins to retain functionality of the cab lights. You just need to pin the power, and ground into the new harness, ...
2019+ New Body Ram Power Folding Mirrors Hitting Glass
My Mirrors are hitting the glass on my window when they fold! This is normal operation for the 2019 New body rams. In the below forum link you will see it is not only common, but apparently there is a very small bit of room that you should have. It ...
2013-2018 Ram Truck Power Folding Mirror Install
Product page can be found by clicking on this link
IOB Genie gave green light but screen is black
This Genie puts the radio into sleep mode while it's programming. This means, after the Genie gives a green LED light, if it's pulled out immediately, the radio screen will stay black. After turning on the vehicle's engine, letting it run 1 minute, ...

Related Articles