Denzo Additional Step For Voice Commands

Denzo Additional Step For Voice Commands

Denzo Additional Step For Voice Commands

Radio is not able to hear my voice commands
Some navigation Units Can Require an extra step to get the voice commands working properly.



VSS HARNESS

The above picture is what your brown VSS harness with the extra wiring will look like. The additional wires are the purple, and brown wires located in Pins #8, and #16.










RADIO HARNESS

The above picture is the connection you will find on the back of your actual radio towards the passenger side. The wires you will be using are located in Pin #2, and #9. The wires are normally Black in #2, and white with a black stripe in #9, but the colors can change depending on the vehicle.

INSTALLATION

You will be splicing the Purple wire on the VSS harness located in Pin #8 into the Black Wire on the Radio connection located in pin #2.
The Brown wire on the VSS harness in pin #16 will be spliced into the wire located at pin #9 on the Black connection, and will usually be white with a black strip.
Please keep in mind the color connection on the actual radio harness may change depending on vehicle, so the easiest way to tell will be to go by the pin location

    • Related Articles

    • Denzo shows splash screen, then blue screen with clock

      Denzo shows splash screen, then blue screen with clock When turning on the vehicle, if your Denzo headunit give you the GMC splash screen, then gives you a blue screen with just the clock on it, no allowing you to navigate further, try the below ...

    • DENSO: Checking for Time and GPS Satellite Signal

      DENSO: Checking for Time and GPS Satellite Signal If you are having issues with the clock not displaying and you've gone through Settings already then, we need to verify the satellite signal. When there is a GPS signal the clock will show. When there ...

    • Denso Units with Inaccurate Time or Showing a " : " sign on the clock

      Denso Units with Inaccurate Time or Showing a " : " sign on the clock If you have a Denso that's giving you a blue screen with two white dots ( : ) where no Digital Clock numbers show, ensure that the VSS harness and GPS antenna are properly ...

    • Denso: No Backup Camera (No Change In Reverse)

      Denso: No Backup Camera (No Change In Reverse) If you are unable to get your backup camera to come on, you will need to go into the setting and select: Backup Cam > Settings > Enable

    • Verify That you are pre-wired Chevy

      How to verify pre-wiring at the tailgate on a Chevy/GM Please use the below pictures, and video to help verify you are pre-wired. You will need to CUT THE COVERING around the plug back far enough to not only see the blue/white, and yellow/grey wires ...