Direction, and Temperature not at the top of the radio!
If you are looking at pictures of an RA4/UAQ screen you may notice some of them show direction, and temperature at the top of the screen. This was something that was actually removed with an update, and will no longer be displayed there.
The reason for this is because both direction, and temperature can be seen in the cluster of the vehicle. They believed it was redundant to display them on the radio as well, so they removed it from the screen.
Related Articles
Hardmount C-SATF-DT Skarkfin Antennas on Heavy Duty Rams
The C-SATF-DT antenna will not fit on Heavy Duty Rams. In this case, the existing sharkfin antenna can stay and only need U-INTC2K
2019-2022 Ram 1500 & Heavy Duty Parasitic Battery Drain
The RAM trucks that are installing any upgrade that will be using the connector to the back of the Cigar Lighter to provide the 12V power and ground to the product "EZDC" harness may need to change the fuse position. Depending on what circuit the ...
AC Climate control visual bug on Ram 1500
Parts Required Two Genies labeled LD, and DS Wire connector that you will use to connect the sensor Temperature Sensor Security bypass if you are an 18+ year Installation Attach the sensor wire to the open molenex connector on the harness that is ...
2019 Heavy Duty UAV or UAX Upgrade Climate issue
Since last year we've had an issue where a 2019+ Ram truck customer (who has installed either a UAV or UAX upgrade) increases or decreases their cabin temperature around 70-74 degrees the vehicle either goes full heat or full cold. This happens ...
How to install 2019+ FCA Security Gateway Module Bypass in Heavy Duty Rams
The bypass must be installed behind the cluster. Below is a video that shows how to uninstall your cluster, install the bypass and program your Genie: https://www.youtube.com/watch?time_continue=2279&v=MhAqc-7AD2k&feature=emb_logo