Nissan Order Compatibility - Send to Customer to verify

There are 3 pieces of information that we need answered before we can fulfill an order for a Nissan Radio, unfortunately the VIN does not provide us this information.

Firstly, we need to know about the audio amplifier you currently have installed (Bose or NON-Bose). We need this information in order for us to know whether the kit will work correctly.

Secondly, the factory radio must be option B in the photos below. Please take a look at the images below and let me know which one you have currently installed in your vehicle, as well as which audio system you have (Bose or NON-Bose):

If you have A or C then this order will need to be cancelled and refunded, as we do not have a wiring solution for the vehicle wiring to those models.

A.)

B).

C).

The third, and last detail we need to know, is the type of camera system the vehicle currently has. There is a regular back-up camera, and there is a 360 camera option.

Thank you for your time.

• Related Articles

• Installed Nissan Altima radio and backup camera doesn't work

  Installed Nissan Altima radio and backup camera doesn't work With car and radio on, and your audio turned off, press and hold the menu button then turn the volume knob left 3 times, right 3 times, left 3 times, right 3 times. This will take you to ...

• Diagram for Denso Amp and GM XM diagram kit

  Diagram for Denso Amp and GM XM diagram kit

• Installing Toyota Amplifier

  Installing Toyota Amplifier Toyota Amp Install Guide The plug with the audio video wiring is optional if you are adding rear backup camera or rear seat entertainment. Otherwise you may tape this up somewhere. The two female connectors are for your ...

• Time won't set for non-Nav Sync 3

  Despite not having navigation programmed to the APIM module, for the non-Nav version of Sync 3 upgrades, all APIMs use a GPS antenna to set time. If time will not stay, when set, check your GPS antenna and make sure it's plugged into the ...

• GMC Amp Power Tap

  GMC Amp Power Tap For some vehicles when upgrading to a radios that needs an amp for increased volume you'll need to tap into the thin pink wire on the amp harness (G-INTAMP). You can tap into the thin pink wire at the amp or at the radio. We ...