How To Master Reset RER and RHR (Video)
How To Master Reset RER and RHR (Video)
If you are having any issues with your MyGIG such as frozen screen or black screen but buttons are lit up and/or the radio is still playing, you can try this first:
•Turn off the car and removing keys,
•Open drivers door wait a few seconds
•Close the door and restart the vehicle.
If this does not fix you can try doing a master reset. Below is a video showing how to do this.
Do not attempt a master reset if you purchased "in motion" programming when you ordered your radio.
THIS WILL erase the programming.
*The video states not to attempt if you have latest maps, disregard please, this will not effect latest maps.*
Related Articles
RER & RHR Engineering Mode (Resetting the radio)
RER & RHR Engineering Mode (Resetting the radio) RER and RHR Engineering Menu: SEEK UP/DOWN and MENU, then click Accept at the warning screen. DO NOT DO A SCREEN CALIBRATION UNDER ANY CIRCUMSTANCES Go down a page or two, and you should see "Factory ...
Bluetooth not pairing in RER or RHR
Bluetooth not pairing in RER or RHR If you're unable to pair your phone with your RER or RHR, and removing the save connections from your handheld device and radio doesn't correct this, first try a Reset by going by accessing Engineering Mode. 1. RER ...
Voice Recognition Not Available / UConnect not available error with Handsfree microphone on RER or RHR
After installing your UConnect Handsfree Microphone into your RER or RHR headunit, and trying to set up voice recognition, if you receive and error stating "Voice recognition not available. UConnect not available," do the below following steps to fix ...
RER / RHR randomly switching AM / FM stations
RER / RHR randomly switching AM / FM stations If your RER or RHR radio is randomly scrolling through AM or FM stations, your SCAN icon is likely pressed. Simply press it again to fix this issue. To help the issue stop, use some isopropyl alcohol 90% ...
UConnect Jumper Kit Information
Product page can be found by clicking on this link The UConnect Jumper kit is designed to allow you to retain use of your factory microphone when upgrading to an RER or RHR navigation radio. For the RER, the jumper cable is used, the USB cable in the ...