How To Master Reset SYNC 3
If your unit is doing something that isn't correct, you can try and do a master reset on the unit, this will fix most issues:
Go to the Settings and you should see Reset to Factory Defaults/Factory Data Reset, press this option.
(If you do not see this press Help first)
You will want to be in an open area where the GPS has a good line of sight to the sky.
Related Articles
Sync 3 Soft Reset
To Soft Reset your Sync 3 system; SIMULTANEOUSLY (at the same exact time) press the Scan Forward button (>>) and the CENTER power button (audio system power) and HOLD them in for a little more than 10 seconds.
How To Soft Reset SYNC 3
A soft reset will resolve many different issues. Press the Settings icon, then press on System and scroll down to the Master Reset option. This will master reset the unit.
Master Reset for Dodge Charger/Challenger ONLY
BEFORE ATTEMPTING A MASTER RESET PLEASE MAKE SURE THAT YOU'VE HAD THE UNIT INSTALLED IN YOUR VEHICLE FOR AT LEAST 48-72 HOURS. MOST ISSUES WILL BE FIXED IN TIME AS YOUR VEHICLE IS ADJUSTING TO THE NEW SYSTEM. A master reset only works for Chargers ...
2020 - 2021 10 inch screen Ford Explorer upgrade only give 8 inch resolution of screen after install
An 8 inch display is the default configuration of this upgrade and proper programing is needed for the vehicle to accept the full 10.1 inch display. If you run into an issue of the display on showing you an 8 inch resolution, after installing the ...
How To Master Reset RER and RHR (Video)
If you are having any issues with your MyGIG such as frozen screen or black screen but buttons are lit up and/or the radio is still playing, you can try this first: •Turn off the car and removing keys, •Open drivers door wait a few seconds •Close ...