Related Articles
Dealer Mode
Method 1: Hold down the bottom corners of the touch screen for another way to enter dealer mode. Method 2: STEP 1: • Put the system into ‘Dealer Mode’ • Hold the Driver Side Temp Up and Temp Down and Front Defrost buttons down at the same time for ...
Ford Cluster issues and Troubleshooting
Ford clusters are programmed by the VIN so, if; Navigation doesn't show up in a cluster: the vehicle may not have had a factory radio with native Nav. The cluster isn't provisioned for the vehicle's steering wheel: check to see if the customer's ...
Ford Explorer Steering wheel Mode Button not working after 4" to 4" Sync 3 Upgrade
After installing the 8.4" Sync 3 upgrade radio, you may notice that your Mode button on your steering wheel no longer functions, this is due to the radio screen size being tied to the steering wheel configuration. There's a 4-inch Configuration: And ...
Ford Fusion & Edge Install Procedure to Retain Climate Controls
Please click here to view the product page Install this harness IF after you install the A/C system temps are not working correctly. You will insert the pins into the harness at the FCIM connector 2402B. It is the plug right next to the one that ...
Day/Night Mode Issues When Viewing Maps
If you're having issues with your navigation unit showing just 'Day mode' or just 'Night mode' please follow these steps: 1. Try to adjust your dimmer in your vehicles dash. This is connected to your navigation unit and may cause the unit to assume ...