I don't have wiring for a cabin sensor in Jeep Wrangler or Gladiator

If your Wrangler JL or Gladiator JT is not pre-wired for the cabin temperature sensor, but you DO have a Sun Sensor or Sun Sensor wiring, you can contact customer support for assistance obtaining a custom wiring kit. Otherwise, you can replace your vehicle's HVAC wiring with part number: 68301852AA which would require disassembly of your dash.

• Related Articles

• Can't control climate on 8.4 Jeep Wrangler screen upgrade

  After installing an 8.4 inch screen upgrade, if you've noticed that you can control your climate on the hard knobs but not the touchscreen, it's because your stock climate control is analog. To fix this you'll need to upgrade to a digital climate ...

• 2018-2023 Jeep Wrangler JL Factory OEM Mopar Passive Entry Keyless Go Upgrade Harness Pinning Guide

  When installing the wiring harnesses for the Passive Entry Upgrade, you may notice the video's harnesses are slightly different than the harnesses that are included with the kit. This is due to bulk manufacturing, and the manufacturer labeled these ...

• 2019 Heavy Duty UAV or UAX Upgrade Climate issue

  Since last year we've had an issue where a 2019+ Ram truck customer (who has installed either a UAV or UAX upgrade) increases or decreases their cabin temperature around 70-74 degrees the vehicle either goes full heat or full cold. This happens ...

• Chrysler Group Remote Add-on CD Player Proper Wiring diagram & dipswitch configuration

  The wiring for the CD player has been updated, as shown below: You'll need to set the dipswitches this way:

• UAQ UAS UAG Acclimation Period upon Installation

  Any of the Uconnect 4 series radio units, such as the UAQ, UAS, UAG, UAV and UAX will require an acclimation period when first installed. Certain features may not be present until the acclimation period has ended, or odd activity can occur. ...