GM - Cameras - Turn On Grid Lines
Turning Grid Lines On:
If you are or aren't seeing grid lines on the screen as you are using the rear view camera, simply follow the instructions down below. Also, click on the link below to see an example of how to turn the grid lines on or off.
OPTION A
1. Click SETTINGS
2. Scroll down to REAR CAMERA
3. Click GUIDANCE LINES
OPTION B
1. Click SETTINGS
2. Click on either DISPLAY or CAMERA (whichever option it gives you)
3. Click on GUIDANCE LINES
Related Articles
GM - Cameras - "No camera available"
The vehicle may not be pre-wired for a backup camera. We will need to exchange the unit for one with the wiring loom. They will need to run the camera wiring behind the glove box to the HMI module. Simply remove the glove compartment and locate the ...
GM Wireless Charger NOT WORKING
If your genuine GM wireless mobile phone charger it's not working please follow the steps below: 1. Ensure the phone is properly placed. The bottom of the phone should be on the pad. It is perfectly normal for the process to take up to 10 seconds ...
The navigation display doesn’t accurately follow me down the highway/Issue with hearing turn-by-turn directions
The navigation display doesn’t accurately follow me down the highway/Issue with hearing turn-by-turn directions If you're having any of the issues below, you may need to install the VSS kit (brown connector) which should have been included in your ...
Genie not programming for IOU upgrade
The vehicle must ALWAYS be in Accessory Mode for one minute, before placing your OBD Genie into the OBDII port, as the Genie can't be read by your vehicle when it's running. However, if the Genie programming is unsuccessful, with navigation not ...
GM Backup Camera Auto Lock Connector
If a customer asks "What is the small, two-pin plug?" (Black and White Wires) This is for the auto tailgate locking mechanism. Customer needs to move the auto lock mechanism over from their factory tailgate handle over to the new tailgate handle from ...