I'm Having Light Issues With My Cluster

I'm Having Light Issues With My Cluster

If you recently purchased a "13-19 Ram Truck Speedometer EVIC Instrument Panel Cluster"  and experiencing light issues please be aware that when upgrading from a regular cluster to a premium cluster if you've replaced any of your headlights, taillights, 3rd brake light, etc then you will receive various “lights out” messages.



There are two possible solutions:

​
1. Go to your local dealer and have him program the option codes into your BCM computer to change the corresponding lights to LED version. 

2. You can purchase the C-LED programmer from our sister company OBD GENIE. Simply go to www.OBDGenie.com



    • Related Articles

    • Ford Cluster issues and Troubleshooting

      Ford clusters are programmed by the VIN so, if; Navigation doesn't show up in a cluster: the vehicle may not have had a factory radio with native Nav. The cluster isn't provisioned for the vehicle's steering wheel: check to see if the customer's ...

    • AC Climate control visual bug on Ram 1500

      Parts Required Two Genies labeled LD, and DS Wire connector that you will use to connect the sensor Temperature Sensor Security bypass if you are an 18+ year Installation Attach the sensor wire to the open molenex connector on the harness that is ...

    • Ram Cab Mounted Lighting Pin out for Uconnect Mirror replacement

      If you have a Cab mounted light, and are changing your rear view mirror to the Uconnect Microphone Mirror you will need to switch some pins to retain functionality of the cab lights.  You just need to pin the power, and ground into the new harness, ...

    • 2019-2022 Ram Heavy Duty Truck OEM Factory LED Fog Light Upgrade Kit Troubleshooting and Pinning Guide

      We've had one occurrence of the Light Switch that is included with this upgrade to add Foglight as an option, where after installation, the vehicle's headlights were stuck in the on position. The headlights would not turn off. Putting the old switch ...

    • Daytime Running Lights Genie (DRL)

      The Daytime Running Lights genie does not provide the option to toggle on and off from the radio. The DRL will be disabled when the vehicle is completely shut off. If you would like to remove the DRL option it requires a "Restore to Factory Default" ...