IO3 to IO6 upgrade Impala

• Related Articles

• Genie not programming for IOU upgrade

  The vehicle must ALWAYS be in Accessory Mode for one minute, before placing your OBD Genie into the OBDII port, as the Genie can't be read by your vehicle when it's running. However, if the Genie programming is unsuccessful, with navigation not ...

• 2015 Chevrolet Colorado MyLink® IO6 Upgrade HMI Location

  The HMI is located behind the screen, and under the ACM, in this vehicle. After removing the other parts to gain access, simply replace the HMI module with your new one and reseat connectors.

• UAM Bezel

  When buy the UAM upgrade for your vehicle, please keep in mind what kind of vehicle you have.  There will be a change in the bezel depending on whether you have a gas vehicle or a diesel vehicle.  Diesel = The ECS button will be located next to the ...

• 2013-2014 Ford F-150 4" to 8" Sync 3 Touchscreen Upgrade

  On the product page there is a photo of the  kit that shows something called a "The hoax module"  ONLY for 2013-2014 Ford F-150 will they be "missing" this item. The customers actually aren't missing anything.  The hoax module isn’t included because ...

• BATTERY/BCM DRAINAGE EXPEDITION 4 to 8 Sync 3 Upgrade Kit

  Are you experiencing battery drainage or your BCM does not sleep after the vehicle is turned off? Make sure that you are running the power to an ignition source as seen on the installation video. The same plug that will run to an ignition source is ...