IOR to IOU 7" to 8" Power and Ground Solution
If the supplied conversion harness for the screen harness is not resulting in power to the display, there is another place to Posi Tap the harness to get power and ground to the screen.
Further down on the back of the bezel will be a connector for the HVAC controls. The customer can use the Posi Taps to wire to pin 1 for power and pin 10 for ground.
Related Articles
IOR to IOU SD Card speech and map data fix.
IOR to IOU SD Card speech and map data fix. Google Drive link for both zipped up folders. https://drive.google.com/drive/folders/12RVHdBoYyg5ylBx1hyVCAA4eiX-PEiid SD card should look like this in Windows File Explorer. Contents should look like the ...
IOR to IOU Information
Features Wireless Apple CarPlay® & Android Auto® capability Voice Activated GPS Navigation with turn-by-turn directions HD Radio XM® Weather & Traffic (may require SiriusXM® level II support) High Definition Backup Camera Plug & Play, pre-programmed ...
SD Card error fix with IOU upgrade
With the GMC IOU upgrade, after install your SD card, if you get a Map Card Read Error, go to "Settings" the click "Return to Factory Setting." This will cause the map card to read.
CPFM Power Folding Mirrors Genie functions
The CPFM Genie (C-PFM) is used to program for the following; Puddle Lights Heated Mirrors Electro-Chromatic Power Folding The tilting feature is used when you put the vehicle into reverse. The mirrors will auto tilt down so you can see the lines and ...
RADIO DOES NOT POWER ON AFTER I INSTALL MY UPGRADE KIT
If you installed your upgrade kit and notice that your radio no longer turns on please check the followings: 1. If you received a C-INT-C4T (the big harness that connects to the radio and existing power harness) in your kit, make sure that the white ...