IOU Upgrade Backup Camera TSB

IOU Upgrade Backup Camera TSB

On some model Silverado trucks the backup camera mounting location needs to be modified to accept the new camera included in the upgrade.
If attempting to install the new camera into the tailgate handle, and you run into an issue where the camera doesn't sit flush onto the mounting location where the 2 torx screws attach, than you will need to trim the raised edge next to one of the torx screw locations (see attached photo, illustrated in red is the edge requiring trimming). 
once the edge has been cut with either a small flush cutter, razor knife, Dremel etc... the camera will mount flush and you can proceed with the installation per the Youtube video.

 
    • Related Articles

    • Installed Nissan Altima radio and backup camera doesn't work

      Installed Nissan Altima radio and backup camera doesn't work With car and radio on, and your audio turned off, press and hold the menu button then turn the volume knob left 3 times, right 3 times, left 3 times, right 3 times. This will take you to ...
    • SD Card error fix with IOU upgrade

      With the GMC IOU upgrade, after install your SD card, if you get a Map Card Read Error, go to "Settings" the click "Return to Factory Setting." This will cause the map card to read.
    • IOR to IOU SD Card speech and map data fix.

      IOR to IOU SD Card speech and map data fix.  Google Drive link for both zipped up folders.  https://drive.google.com/drive/folders/12RVHdBoYyg5ylBx1hyVCAA4eiX-PEiid SD card should look like this in Windows File Explorer. Contents should look like the ...
    • Denso: No Backup Camera (No Change In Reverse)

      Denso: No Backup Camera (No Change In Reverse) If you are unable to get your backup camera to come on, you will need to go into the setting and select: Backup Cam > Settings > Enable
    • GM Backup Camera Auto Lock Connector

      If a customer asks "What is the small, two-pin plug?" (Black and White Wires) This is for the auto tailgate locking mechanism. Customer needs to move the auto lock mechanism over from their factory tailgate handle over to the new tailgate handle from ...