DIFFERENT VEHICLE LOGO AND MISSING ICONS

DIFFERENT VEHICLE LOGO AND MISSING ICONS


If you just installed your infotainment system and is getting a different splash logo. For example; your vehicle is a Jeep Wrangler but the radio shows Ram, that is completely normal and for all FCA vehicles. The radio will eventually adjust itself, but it needs to sleep. That way the radio can properly sync with the vehicle by retrieving the VIN and the information from the BCM. For some vehicles it may take less than 30 seconds and for others it may require the vehicle to sleep overnight or longer. However, doing a complete key cycle or a few key cycles can help the process. Please refer to the steps below. 

Key Cycles




•Stay in vehicle

•Close the door

•Remove the keys

•Wait until the headlights, dash lights, and radio turn completely off

•Start the vehicle




    • Related Articles

    • FCA - Restoring Vehicle Configuration

      How to restore vehicle configuration (Step by Step)  1. From the Vehicle Select Screen, navigate to the Vehicle Topology Screen or Electronic Control Unit (ECU) List  2. Select Body Control Modules (BCM)  3. From the BCM Screen, select the MISC ...

    • Colored FAKRAs/Connectors behind all Chrysler/Dodge/Jeep radios and modules

      - White; is AM/FM. - Blue; is GPS/Compass. (Only on units not compatible with   - Yellow/Curry; is SiriusXM. (You might find a yellow connector if you remove the blue pigtail on the new unit. Depending on the vehicle, you may find only a yellow port ...

    • Wrong Logo on Startup

      If you see the wrong logo on startup of the radio, ex. Dodge in Chrysler, vice-versa, turn the key off and re-start the vehicle. The proper logo should appear after 1-2 restarts.

    • Missing Travel Link Icon

      If you've installed the UAQ radio and you are not seeing the Travel Link icon it will not appear unless your vehicle originally came with that function because the code will not be set in your BCM. The previous radio such as an RA4 (VP4) would show ...

    • AC Climate control visual bug on Ram 1500

      Parts Required Two Genies labeled LD, and DS Wire connector that you will use to connect the sensor Temperature Sensor Security bypass if you are an 18+ year Installation Attach the sensor wire to the open molenex connector on the harness that is ...