MyFord Touch Sync 2 Navigation Upgrade

• Related Articles

• Sync 3 upgrade gives Navigation Fault

  This issue arrives if the Sync 3 upgrade doesn't have our infotainment GPS antenna plugged in upon start-up: To resolve this, always plug in the GPS antenna we supplied you BEFORE turning on the unit/vehicle.

• MyFord Touch Navigation Issues (Tracking And No GPS Lock)

  The Navigation System in the MyFord Touch (MFT) models has two integral parts.  First is the GPSM (Global Positioning System Module) which is a GPS receiver.   The other part of the system is the APIM (Accessory Protocol Interface Module) also known ...

• Ford SYNC Navigation Upgrade USB Stick 1/2 Issues

  Below are the common issues associated with the USB Stick Sync Upgrade Kit "You have already updated your software successfully. Please remove USB stick"        •Proceed to USB stick two. You do not need to run USB stick one. System did not reset ...

• Time won't set for non-Nav Sync 3

  Despite not having navigation programmed to the APIM module, for the non-Nav version of Sync 3 upgrades, all APIMs use a GPS antenna to set time. If time will not stay, when set, check your GPS antenna and make sure it's plugged into the ...

• Ford Sync 1 - Sync and Satellite Radio Issues

  If you do not have Sync - You will not gain (Sync) Bluetooth handsfree calling by upgrading to the Sync 1 GPS navigation radio. A factory-installed Sync module with wiring is required which cannot be added after-factory. If you have Sync but not ...