Mygig Camera Interface C-INTC2T Pinning Guide

If the vehicle already has the factory connector that our camera kit provides, then you will need to de-pin our RCA wires from our connector and pin them into your factory connector. It's not a good idea to unplug the factory connector and not use it, in favor of our connector, because there are lines for other components in the vehicle that will be stopped.

Looking at the back of the connector, you'll be counting from the tiny #1 on the connector starting at the wide square shaped cavity. Number 3 is actually going to be the second small cavity, which is the camera signal, and number 4 which is the third small cavity will be camera return. All you need to do is insert our red wire pin to the 3, and the black wire pin to the 4, and then plug the connector into the radio.

• Related Articles

• C-INTC3T RE2 RB5 Camera Repining Guide

  C-INTC3T RE2 RB5 Camera Repining Guide If your RB5 or RE2 radio already has the C3 connector with populated wires like the photo below, you will not be able to use our connector because you will lose audio and microphone for bluetooth functions. You ...

• Custom Genuine MOPAR Tailgate Camera BCM Posi-Tap Guide

  The installation of this kit does receive a lot of traffic for assistance. The installation of the whole kit itself is not necessarily difficult, but the part where the BCM is tapped into can be difficult. The video below shows how to do it on a ...

• C-INTC2T Mygig Camera Repining RER RHR REN RBZ RHB

  C-INTC2T Mygig Camera Repining RER RHR REN RBZ RHB This is for vehicles that have a Mygig style radio. Such as RER/RHR/REN/RBZ/RHB and the white plug already exists behind the radio. You will not be using our connector provided, you will need to ...

• OBD Genie Troubleshooting Guide

  OBD Genie Troubleshooting Guide Following this simple instructions is the first steps to getting you back on the road with all the new modifications. My OBDGenie is not doing anything. No lights appear when plugged in, I can't tell if it's getting ...

• 2018-2023 Jeep Wrangler JL Factory OEM Mopar Passive Entry Keyless Go Upgrade Harness Pinning Guide

  2018-2023 Jeep Wrangler JL Factory OEM Mopar Passive Entry Keyless Go Upgrade Harness Pinning Guide When installing the wiring harnesses for the Passive Entry Upgrade, you may notice the video's harnesses are slightly different than the harnesses ...