No Audio/Audio Only In One Channel (Rear/Front)
Go to the radio settings of the radio.
Scroll to the bottom and select system information.
Select "Restore to Factory Default." Radio will reset.
If still having issues, Perform a Canbus reset. This is where you removing the battery cables (Starting with negative) and then reinstalling them (Starting Positive).
Then test to see if issue resolved. If not contact our Customer Support line or chat.
Customer Support
Toll Free — 1-855-636-6287
(Select option 1 for Customer Support)
Related Articles
C-BEZ-VOL
For the C-BEZ-VOL, Customer is to plug the passthrough harness to the back of the HVAC module that they install into the new C-BEZ-VOL. Here is our Volume bezel. At the bottom you can see the passthrough harness. Here is a closer look at the ...
Enzo C-INT4CK Instructions
FCA Heated and Ventilated Seat including Heated Steering Wheel Emulator (C-INT4CK) For those who upgrade to the 8.4" radio and their heated/cooled seats & heated/cooled steering wheel in the new radio are grayed out, we have a solution. Example of ...
JEEP Wrangler JL Rear Park Sense (Sensors are reversed)
JEEP Wrangler JL Rear Park Sense (Sensors are reversed) If the sensors are reacting on the instrument cluster reversed... Such as an object or person on the rear-right side of the vehicle but the instrument cluster saying the object or person is on ...
C-INTC3T RE2 RB5 Camera Repining Guide
C-INTC3T RE2 RB5 Camera Repining Guide If your RB5 or RE2 radio already has the C3 connector with populated wires like the photo below, you will not be able to use our connector because you will lose audio and microphone for bluetooth functions. You ...
Uconnect Radio Upgrade - Missing Icons on Home Row
Uconnect Radio Upgrade - Missing Icons on Home Row Deeper Question: Well I have the media one, but I used to have media and radio as two seperate ones, now I just have media so I have to go there then select satalite radio which is a pain, was nice ...