OBD Genie App
OBD Genie App for C-RVC only
To use the app to refresh the genie for Rear View Camera programming follow the steps below.
1. Download the OBD Genie Troubleshooting App on a iPhone or iPad. (App only works on Apple phones/pads)
2. Open the app, swipe left to continue.
3. Watch the video if needed to show how to use the genie.
4. Once the vehicle is in accessory mode or the engine is running. Now plug the OBD Genie into the OBD port in the vehicle and hit "Start Scanning".
5. Now click on "Wholesales Support Page!" Even if you aren't a wholesales dealer.
6a. Under "Wholesales Support Page" Click on "For 2018 and below classic body JK vehicles please tap here!" for anything that didn't come with a bypass. There is a mistake of app where JL and JK are reversed.
6b. Under "Wholesales Support Page" Click on "For 2018 and newer JL vehicles please tap here!" for anything that did come with a bypass. There is a mistake of app where JL and JK are reversed.
Bypass Example picture
Related Articles
OBD Genie Troubleshooting Guide
OBD Genie Troubleshooting Guide Following this simple instructions is the first steps to getting you back on the road with all the new modifications. My OBDGenie is not doing anything. No lights appear when plugged in, I can't tell if it's getting ...There's no option to toggle off Daytime Running Lights after using OBD Genie
There's no option to toggle off Daytime Running Lights after using OBD Genie In North America, any Chrysler-based vehicle that's of 2015 year or older no longer has the ability to toggle off Daytime Running Lights. This is whether the feature was ...Q: I installed the C-ACC-LD OBD Genie programmer in my 2011-2014 Chrysler 300 / Dodge Charger to enable AUTO temperature control and it's not working.
Q: I installed the C-ACC-LD OBD Genie programmer in my 2011-2014 Chrysler 300 / Dodge Charger to enable AUTO temperature control and it's not working. A: If the programmer's embedded LED turned green then the vehicle's computer has been programmed. ...Cargo Camera Not Showing Up On Screen
Cargo Camera Not Showing Up On Screen If you're having issues with your VP3 (RA3) VP4 (RA4) Infotainment system not showing the Cargo camera, or you're not sure how to access it, please continue below: Your unit may appear to visually look ...IOB Genie gave green light but screen is black
This Genie puts the radio into sleep mode while it's programming. This means, after the Genie gives a green LED light, if it's pulled out immediately, the radio screen will stay black. After turning on the vehicle's engine, letting it run 1 minute, ...