RAM Only--The Replacement USB Hub Does Not Fit Properly

RAM Only--The Replacement USB Hub Does Not Fit Properly

RAM Only--The Replacement USB Hub Does Not Fit Properly

This is due to the fact that there is only one Apple Carplay-compatible hub for the Dodge Ram and it's designed for 2018 vehicles.
Please see the hub's install video for further information: HERE.
You will need to tap the hub in to make it fit.
There is no replacement hub or troubleshooting we can recommend beyond that.
Sometimes you may need to trim a piece near the bezel to make the plugs fit. 


You only need to install the replacement hub if you will be using Apple Carplay.

If you have an Android device and will be using Android Autoplay, you do not need to install our replacement hub.

    • Related Articles

    • Ford F150 USB Hub Install

      2016 Ford vehicles's need a USB media hub swap to get Apple CarPlay and Android Auto working. Here is the install for an F-150. F-HUB-SML F-HUB-R3 F-HUB

    • Ram Cab Mounted Lighting Pin out for Uconnect Mirror replacement

      Ram Cab Mounted Lighting Pin out for Uconnect Mirror replacement If you have a Cab mounted light, and are changing your rear view mirror to the Uconnect Microphone Mirror you will need to switch some pins to retain functionality of the cab lights. ...

    • RAM Wireless Charger - Power Inverter Outlets Not Working

      RAM Wireless Phone Charger Listing https://infotainment.com/shop/interior-accessories/wireless-smartphone-chargers/c-bdlwrlchg-dt/ When installing the wireless charger kit, the included harness requires you to pin to connector C5/E on the BCM. The ...

    • USB Hub Won't Turn Off

      This is a feature, not a bug. The USB Hub will stay on for 1-2 hours after the vehicle has been locked. This will not drain your battery.

    • AC Climate control visual bug on Ram 1500

      Parts Required Two Genies labeled LD, and DS Wire connector that you will use to connect the sensor Temperature Sensor Security bypass if you are an 18+ year Installation Attach the sensor wire to the open molenex connector on the harness that is ...