Ram® Truck Steering Wheel Audio Control Kit: WHICH BUTTON GOES TO THE LEFT AND RIGHT SIDE OF THE STEERING WHEEL?

• Related Articles

• My steering wheel controller is not working with the new system.

  In the Brick Kit should be a new steering control module. Make sure that you replace your existing steering wheel controller with the one provided. If it is still not working, then try using your original controller. We’ve found that with some ...

• Ford Explorer Steering wheel Mode Button not working after 4" to 4" Sync 3 Upgrade

  After installing the 8.4" Sync 3 upgrade radio, you may notice that your Mode button on your steering wheel no longer functions, this is due to the radio screen size being tied to the steering wheel configuration. There's a 4-inch Configuration: And ...

• Enzo C-INT4CK Instructions

  FCA Heated and Ventilated Seat including Heated Steering Wheel Emulator (C-INT4CK) For those who upgrade to the 8.4" radio and their heated/cooled seats & heated/cooled steering wheel in the new radio are grayed out, we have a solution. Example of ...

• AC Climate control visual bug on Ram 1500

  Parts Required Two Genies labeled LD, and DS Wire connector that you will use to connect the sensor Temperature Sensor Security bypass if you are an 18+ year Installation Attach the sensor wire to the open molenex connector on the harness that is ...

• Steering Wheel Controls Not Working

  SWC - Steering Wheel Controls Did you install the XP1 harness (if applicable)?  Not all vehicles use the XP1 harness If your original steering wheel control had the phone button and you replaced that with the one from the kit, try your original SWC. ...