RAM Wireless Charger - Power Inverter Outlets Not Working
RAM Wireless Phone Charger Listing
When installing the wireless charger kit, the included harness requires you to pin to connector C5/E on the BCM. The pin is number 45, and may already have an Orange wire with a dark blue stripe. If you de-pin the orange wire from the BCM and tap the wire from the kit directly to pin 45, you will accidentally cut linbus communication. This will result in the inverter outlets not functioning, as well as potential other issues related to linbus communication.
Instead of removing the wire from pin 45, simply splice the wire to the populated wire at pin 45. This can be done by stripping the wire and soldering, or as easy as using a posi-tap if you do not have soldering experience.
Related Articles
GM Wireless Charger NOT WORKING
If your genuine GM wireless mobile phone charger it's not working please follow the steps below: 1. Ensure the phone is properly placed. The bottom of the phone should be on the pad. It is perfectly normal for the process to take up to 10 seconds ...Q: I installed the C-ACC-LD OBD Genie programmer in my 2011-2014 Chrysler 300 / Dodge Charger to enable AUTO temperature control and it's not working.
Q: I installed the C-ACC-LD OBD Genie programmer in my 2011-2014 Chrysler 300 / Dodge Charger to enable AUTO temperature control and it's not working. A: If the programmer's embedded LED turned green then the vehicle's computer has been programmed. ...15 Charger/Challenger USB hub Install/removal
These are instructions provided by a customer for an easier install/removal of the USB hub than the removing the entire console. USB Hub Removal/Install For a Charger, the swap of the hub is MUCH easier. While the same may apply to the Challenger, I ...Ram Cab Mounted Lighting Pin out for Uconnect Mirror replacement
If you have a Cab mounted light, and are changing your rear view mirror to the Uconnect Microphone Mirror you will need to switch some pins to retain functionality of the cab lights. You just need to pin the power, and ground into the new harness, ...AC Climate control visual bug on Ram 1500
Parts Required Two Genies labeled LD, and DS Wire connector that you will use to connect the sensor Temperature Sensor Security bypass if you are an 18+ year Installation Attach the sensor wire to the open molenex connector on the harness that is ...