RER & RHR Engineering Mode (Resetting the radio)

RER & RHR Engineering Mode (Resetting the radio)

RER and RHR Engineering Menu: SEEK UP/DOWN and MENU, then click Accept at the warning screen.
DO NOT DO A SCREEN CALIBRATION UNDER ANY CIRCUMSTANCES

Go down a page or two, and you should see "Factory Default Reset" or "Factory Reset" and
after selecting that, the radio will reboot after about 30-60 seconds.
The radio will have to recollect satellites for GPS, so nav might be inaccurate right away.

    • Related Articles

    • Bluetooth not pairing in RER or RHR

      If you're unable to pair your phone with your RER or RHR, and removing the save connections from your handheld device and radio doesn't correct this, first try a Reset by going by accessing Engineering Mode. 1. RER and RHR Engineering Menu: SEEK ...

    • RER / RHR randomly switching AM / FM stations

      If your RER or RHR radio is randomly scrolling through AM or FM stations, your SCAN icon is likely pressed. Simply press it again to fix this issue.

    • Dealer Mode

      Method 1: Hold down the bottom corners of the touch screen for another way to enter dealer mode.  Method 2: STEP 1: • Put the system into ‘Dealer Mode’ • Hold the Driver Side Temp Up and Temp Down and Front Defrost buttons down at the same time for ...

    • Voice Recognition Not Available / UConnect not available error with Handsfree microphone on RER or RHR

      After installing your UConnect Handsfree Microphone into your RER or RHR headunit, and trying to set up voice recognition, if you receive and error stating "Voice recognition not available. UConnect not available," do the below following steps to fix ...

    • How To Master Reset RER and RHR (Video)

      If you are having any issues with your MyGIG such as frozen screen or black screen but buttons are lit up and/or the radio is still playing, you can try this first:  •Turn off the car and removing keys,  •Open drivers door wait a few seconds  •Close ...