RER / RHR randomly switching AM / FM stations

• Related Articles

• Bluetooth not pairing in RER or RHR

  If you're unable to pair your phone with your RER or RHR, and removing the save connections from your handheld device and radio doesn't correct this, first try a Reset by going by accessing Engineering Mode. 1. RER and RHR Engineering Menu: SEEK ...

• RER & RHR Engineering Mode (Resetting the radio)

  RER and RHR Engineering Menu: SEEK UP/DOWN and MENU, then click Accept at the warning screen. DO NOT DO A SCREEN CALIBRATION UNDER ANY CIRCUMSTANCES Go down a page or two, and you should see "Factory Default Reset" or "Factory Reset" and after ...

• Sources always revert back to AM/FM after vehicle restart, with Sync 3

  If your phone was connected to your USB port when your vehicle was last in use, and you restart your vehicle without the phone plugged up, your Sync 3 will revert to AM/FM sources. This is a normal feature of the Sync 3, and your previously used ...

• C-INTC2T Mygig Camera Repinning RER RHR REN RBZ RHB

  This is for vehicles that have a Mygig style radio. Such as RER/RHR/REN/RBZ/RHB and the white plug already exists behind the radio. You will not be using our connector provided, you will need to de-pin the 2 wires from our connector, and then pin ...

• Voice Recognition Not Available / UConnect not available error with Handsfree microphone on RER or RHR

  After installing your UConnect Handsfree Microphone into your RER or RHR headunit, and trying to set up voice recognition, if you receive and error stating "Voice recognition not available. UConnect not available," do the below following steps to fix ...