If your screen is locked up try turning off the vehicle, remove the keys and open the door, shut the door and start vehicle, test the unit.
If it's still having issues, try resetting the system;
Press Mute + Browse/Enter, release keys when radio shuts down (black screen).
If that doesn't work, try pressing the "Back" and "Screen off" buttons simultaneously for 5 seconds.
Related Articles
Denzo shows splash screen, then blue screen with clock
When turning on the vehicle, if your Denzo headunit give you the GMC splash screen, then gives you a blue screen with just the clock on it, no allowing you to navigate further, try the below steps in order. Moving to the next step, if the last didn't ...
IOB Genie gave green light but screen is black
This Genie puts the radio into sleep mode while it's programming. This means, after the Genie gives a green LED light, if it's pulled out immediately, the radio screen will stay black. After turning on the vehicle's engine, letting it run 1 minute, ...
IOU has blue screen and Cadillac splash after install
This is completely normal, as the screen will be blue, count down then give a Cadillac splash screen upon install install. This will not correct itself until the vehicle is restarted.
Customizing Lower Icons on the radio screen
The lower row of icons on the 8.4-inch radio can be customized by entering the UConnect apps screen then pressing & holding the desired icon and dragging then dropping to the desired location on the lower portion of the screen "home row"
Can't control climate on 8.4 Jeep Wrangler screen upgrade
After installing an 8.4 inch screen upgrade, if you've noticed that you can control your climate on the hard knobs but not the touchscreen, it's because your stock climate control is analog. To fix this you'll need to upgrade to a digital climate ...