Speed Limits no longer available in EVIC cluster, after IO6 upgrade

Speed Limits no longer available in EVIC cluster, after IO6 upgrade

When upgrading your HMI to factory navigation, you will lose the feature of having Speed Limits in your EVIC cluster, as that is only retained with vehicles that had native navigation already.
    • Related Articles

    • Genie not programming for IOU upgrade

      The vehicle must ALWAYS be in Accessory Mode for one minute, before placing your OBD Genie into the OBDII port, as the Genie can't be read by your vehicle when it's running. However, if the Genie programming is unsuccessful, with navigation not ...
    • Time won't set for non-Nav Sync 3

      Despite not having navigation programmed to the APIM module, for the non-Nav version of Sync 3 upgrades, all APIMs use a GPS antenna to set time. If time will not stay, when set, check your GPS antenna and make sure it's plugged into the ...
    • Sync 3 upgrade gives Navigation Fault

      This issue arrives if the Sync 3 upgrade doesn't have our infotainment GPS antenna plugged in upon start-up: To resolve this, always plug in the GPS antenna we supplied you BEFORE turning on the unit/vehicle.
    • I'm Having Light Issues With My Cluster

      I'm Having Light Issues With My Cluster If you recently purchased a "13-19 Ram Truck Speedometer EVIC Instrument Panel Cluster" and experiencing light issues please be aware that when upgrading from a regular cluster to a premium cluster if you've ...
    • Can't Find Address with UAX On-Board Navigation

      Can't Find Address with UAX On-Board Navigation This happens if you're trying you're trying to input addresses in the learn search bar at the top of the Navigation screen. This bar is for 4G signal (Internet Search), not GPS, so you'll get an error ...