Sync 4 Screen is Glitchy / Back-up Camera Does not appear in Reverse

Sync 4 Screen is Glitchy / Back-up Camera Does not appear in Reverse

Problem: Customer's Sync 4 display screen is glitchy or the backup camera does not appear when in reverse.

Possible Resolution: Disconnect the supplied harness and reconnect to the factory plugs. Ensure the yellow RCAs are securely connected. Test without our harness to make sure the screen and APIM are working properly to rule the harness at fault. Try re-installing the harness and make sure that it does not get bent or pinched.

For example, the space behind the Bronco display is very tight, please ensure the harness isn't pinched, preventing a full connection.

    • Related Articles

    • When screen experiences imaging issues other than back up camera in Chevy vehicles

      In Chevy vehicles, your HMI (Human Machine Interface) controls your visual feedback. Meaning if you experience an issue where the screen is having imaging issues only during certain functions, it may be the HMI, however, if the back up camera has a ...

    • Carplay back to Sync 3 Interface.

      To switch from Carplay to the Sync 3 Interface, you hit the "apps" button the bottom right corner when Carplay is active. Then hit the Ford Sync App that is listed under the apps listing. That will take you back to the Ford Sync 3 interface. 

    • Jeep Spare Tire Camera Reverse Image

      If you have a camera where the left side of the screen is showing the right side of the vehicle the camera is most likely configured for front facing camera. To reverse the image to rear view, and also have your grid lines appear you will need to cut ...

    • "Service Rearview camera" error after installing GM back up camera

      Once confirming you're pre-wired in a 15 model vehicle or installing the camera in a 16 year vehicle or newer, you'll typically want to install the camera wiring into the dummy plug. However, those who have a locking tailgate handle be sure to swap ...

    • Can't navigate multiple camera inputs with UAQ/UAS upgrade

      If your vehicle has multiple cameras, such as a reverse, cargo and front camera, and you have the appropriate hardware to route which camera image appears in your radio head-unit's screen, note that not all of these functions will be retained when ...