Toyota Tacoma Entune 3.0 won't set clock or tracking miles/kilometers
Toyota Tacoma Entune 3.0 won't set clock or tracking miles/kilometers
If your new Entune 3.0 radio doesn't allow you to press on the time and set the clock or miles or kilometers don't track or allow change, that's related to the GPS connection.
Make sure your GPS antenna is fully connected, that the antenna is placed in a position to retrieve good signal and the antenna is in working order.
This will resolve the issue. If not, then the radio itself may have an issue.
Related Articles
2016 - 2020 Toyota Tacoma Entune 3.0 Radio doesn't get any audio
2016 - 2020 Toyota Tacoma Entune 3.0 Radio doesn't get any audio After installing this upgrade, and allowing the vehicle to sleep up to 48 hours, if there's no audio then check to see if there's a JBL logo on the vehicle's radio fascia. If so, that ...
2016-2020 Toyota Tacoma Entune 3.0 radio won't power on after installation
2016-2020 Toyota Tacoma Entune 3.0 radio won't power on after installation After installation of your Entune radio, you may run into a situation where your radio won't power on. The reason being where one of the harnesses is hooked up; You have to ...
Time won't set for non-Nav Sync 3
Despite not having navigation programmed to the APIM module, for the non-Nav version of Sync 3 upgrades, all APIMs use a GPS antenna to set time. If time will not stay, when set, check your GPS antenna and make sure it's plugged into the ...
Toyota radio resets
Toyota radio resets On Denso-ten unit: Hold Apps or Info then flip headlights switch on/off 4 times, this will take you to diagnostics menu. Hold INIT and MEMORY CLR to delete data, if you went through INFO it will be in the the first option. ...
Toyota Antenna Installation
Toyota Antenna Installation If you're having issues with antenna installation, specifically fit, please see below: Video Explanation/Guide: Pictured Instructions: This is what the antenna looks like if purchased by Infotainment.com These two radios ...