Cargo Camera - Grid Lines

Cargo Camera - Grid Lines

To turn off Grid Lines for a RAM Cargo Camera:

You will need to snip the green wire, this might be labeled "Parking Lines".

If you are still seeing the grid lines (parking lines) after snipping the green wire or if the green wire is already snipped, then do the opposite and attach the green wires together.

Turn off your vehicle and restart it to test the camera. 


 


    • Related Articles

    • Cargo Camera Icon

      "My cargo camera icon is not showing up, but I got a green light when I used the OBDGenie?" Perform a can-bus reset. CAN-bus Reset: Remove positive and negative cables from the vehicle battery. Touch and hold the cables together for  5 - 10 seconds. ...

    • GM - Cameras - Turn On Grid Lines

      Turning Grid Lines On: If you are or aren't seeing grid lines on the screen as you are using the rear view camera, simply follow the instructions down below. Also, click on the link below to see an example of how to turn the grid lines on or off. ...

    • Cargo Camera - Blue / Black Screen

      If you are experiencing problems with your cargo camera and if you are getting a blue screen please make sure to follow the steps below.   PROPER CONNECTIONS.  1. Make sure that you have the proper connections.       *If you have a factory rear ...

    • Can't navigate multiple camera inputs with UAQ/UAS upgrade

      If your vehicle has multiple cameras, such as a reverse, cargo and front camera, and you have the appropriate hardware to route which camera image appears in your radio head-unit's screen, note that not all of these functions will be retained when ...

    • Cargo Camera Not Showing Up On Screen

      If you're having issues with your VP3 (RA3) VP4 (RA4) Infotainment system not showing the Cargo camera, or you're not sure how to access it, please continue below:  Your unit may appear to visually look differently than the one below. But generally, ...