What is the small, two-pin plug? (Black and White Wires)

The small plug will connect to the locking mechanism when they swap that into the new tailgate handle. This cable is only needed for vehicles which are equipped with an auto-locking tailgate.

• Related Articles

• UAX / UAV doesn't give display

  After installing your UAX or UAV upgrade, if you notice that you have a black screen. This is caused by one of two issues: The Genie didn't produce a green LED to properly program the vehicle to turn on the radios screen. To fix this: If you have a ...

• IOB Genie gave green light but screen is black

  This Genie puts the radio into sleep mode while it's programming. This means, after the Genie gives a green LED light, if it's pulled out immediately, the radio screen will stay black.  After turning on the vehicle's engine, letting it run 1 minute, ...

• Lockpick - Blue / Black Screen

  How do you have the camera connected to the rear camera interface? The camera yellow video plug will plug into the yellow RCA plug on the big 52 pin harness labeled camera input. Check the ARC box, pop off the top and make sure the dip switches in ...

• Cargo Camera - Blue / Black Screen

  If you are experiencing problems with your cargo camera and if you are getting a blue screen please make sure to follow the steps below.   PROPER CONNECTIONS.  1. Make sure that you have the proper connections.       *If you have a factory rear ...

• RA4/RA3 troubleshooting steps

  RA4/RA3 Radio unit won't power on? After installing your 8.4 RA4 or RA3 head unit, and turning on your vehicle, you should get a splash screen right away. If your screen is completely black, with no backlight, with the engine on, put your ear near ...