When screen experiences imaging issues other than back up camera in Chevy vehicles
In Chevy vehicles, your HMI (Human Machine Interface) controls your visual feedback. Meaning if you experience an issue where the screen is having imaging issues only during certain functions, it may be the HMI, however, if the back up camera has a perfect image and fragmented otherwise, this is due to damage on the blue mini USB coming from the HMI and going to the screen.
You'll need a new mini USB to fix this issue.
Related Articles
Display not showing but rear camera does in a GM vehicle
This is caused by a faulty ACM, and the ACM will need to be replaced. It doesn't matter if the HMI is a 2.0 or 2.5, it would still work. This is illustrated when the vehicle is put in reverse and shows a picture, meaning HMI & screen are ok. The ACM ...
Cargo Camera Not Showing Up On Screen
Cargo Camera Not Showing Up On Screen If you're having issues with your VP3 (RA3) VP4 (RA4) Infotainment system not showing the Cargo camera, or you're not sure how to access it, please continue below: Your unit may appear to visually look ...
Verify That you are pre-wired Chevy
How to verify pre-wiring at the tailgate on a Chevy/GM Please use the below pictures, and video to help verify you are pre-wired. You will need to CUT THE COVERING around the plug back far enough to not only see the blue/white, and yellow/grey wires ...
Sync 4 Screen is Glitchy / Back-up Camera Does not appear in Reverse
Problem: Customer's Sync 4 display screen is glitchy or the backup camera does not appear when in reverse. Possible Resolution: Disconnect the supplied harness and reconnect to the factory plugs. Ensure the yellow RCAs are securely connected. Test ...
Sync 1 With separate screen Camera installation
The interface will plug into the back of the ACM, or CD player in this case, and NOT the screen. This is where you plug the interface in, and you will just connect your factory plug into the female end of the connection