Related Articles
DIFFERENT VEHICLE LOGO AND MISSING ICONS
If you just installed your infotainment system and is getting a different splash logo. For example; your vehicle is a Jeep Wrangler but the radio shows Ram, that is completely normal and for all FCA vehicles. The radio will eventually adjust itself, ...
When I Press On The Screen, Touch Is Detected In Wrong Spot
If you press 'nav' and get 'pairing device' or something similar and it seems that the icons do not bring up the correct function then the screen will need to be calibrated. Please follow the below guide to calibrate. If you have additional ...
How to install 2019+ FCA Security Gateway Module Bypass in Heavy Duty Rams
The bypass must be installed behind the cluster. Below is a video that shows how to uninstall your cluster, install the bypass and program your Genie: https://www.youtube.com/watch?time_continue=2279&v=MhAqc-7AD2k&feature=emb_logo
2016 - 2020 Toyota Tacoma Entune 3.0 Radio doesn't get any audio
After installing this upgrade, and allowing the vehicle to sleep up to 48 hours, if there's no audio then check to see if there's a JBL logo on the vehicle's radio fascia. If so, that means there's an amp incompaitbility and this upgrade will not ...
UAQ UAS UAG Acclimation Period upon Installation
Any of the Uconnect 4 series radio units, such as the UAQ, UAS, UAG, UAV and UAX will require an acclimation period when first installed. Certain features may not be present until the acclimation period has ended, or odd activity can occur. ...