Cameras
Verify That you are pre-wired Chevy
How to verify pre-wiring at the tailgate on a Chevy/GM Please use the below pictures, and video to help verify you are pre-wired. You will need to CUT THE COVERING around the plug back far enough to not only see the blue/white, and yellow/grey wires ...
GM Backup Camera Auto Lock Connector
If a customer asks "What is the small, two-pin plug?" (Black and White Wires) This is for the auto tailgate locking mechanism. Customer needs to move the auto lock mechanism over from their factory tailgate handle over to the new tailgate handle from ...
Auto-Locking Tailgate: "Where do I plug in camera?" or "I get a blue screen/no camera available screen on radio" (IOB & IO4/5/6)
Auto-Locking Tailgate: "Where do I plug in camera?" or "I get a blue screen/no camera available screen on radio" (IOB & IO4/5/6) If you have a locking tailgate, please follow the cable from the existing handle to where it's plugged in. Replace plug ...
GM - Cameras - "No camera available"
The vehicle may not be pre-wired for a backup camera. We will need to exchange the unit for one with the wiring loom. They will need to run the camera wiring behind the glove box to the HMI module. Simply remove the glove compartment and locate the ...
GM - Cameras - Turn On Grid Lines
Turning Grid Lines On: If you are or aren't seeing grid lines on the screen as you are using the rear view camera, simply follow the instructions down below. Also, click on the link below to see an example of how to turn the grid lines on or off. ...