Installed Nissan Altima radio and backup camera doesn't work
With car and radio on, and your audio turned off, press and hold the menu button then turn the volume knob left 3 times, right 3 times, left 3 times, right 3 times. This will take you to the engineering menu. Once there, you'll see an option for camera system.
Change the camera option to "Rear." If that doesn't work, change back to "ABM."
Related Articles
Nissan Order Compatibility - Send to Customer to verify
There are 3 pieces of information that we need answered before we can fulfill an order for a Nissan Radio, unfortunately the VIN does not provide us this information. Firstly, we need to know about the audio amplifier you currently have installed ...
IOU Upgrade Backup Camera TSB
On some model Silverado trucks the backup camera mounting location needs to be modified to accept the new camera included in the upgrade. If attempting to install the new camera into the tailgate handle, and you run into an issue where the camera ...
"Service Rearview camera" error after installing GM back up camera
Once confirming you're pre-wired in a 15 model vehicle or installing the camera in a 16 year vehicle or newer, you'll typically want to install the camera wiring into the dummy plug. However, those who have a locking tailgate handle be sure to swap ...
RADIO DOES NOT POWER ON AFTER I INSTALL MY UPGRADE KIT
If you installed your upgrade kit and notice that your radio no longer turns on please check the followings: 1. If you received a C-INT-C4T (the big harness that connects to the radio and existing power harness) in your kit, make sure that the white ...
Denso: No Backup Camera (No Change In Reverse)
If you are unable to get your backup camera to come on, you will need to go into the setting and select: Backup Cam > Settings > Enable